field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $31.42.Position Overview:This position is responsible for communicating and supporting JM core values and delivering the JM experience.The purpose of the Maintenance Technician’s role is to perform routine and non-routine maintenance on production and facility equipment to support production of roofing materials. This position is also responsible for meeting facility targets for safety, productivity, and machine uptime.&nbsp; This role will conduct effective problem solving and troubleshoot processes to develop corrective actions.Responsibilities:&nbsp; <ul><li>Follow all Johns Manville safety and environmental procedures and policies.</li><li>Attend plant safety and training meetings as scheduled.</li><li>Follow Job Safety Analysis (JSA's), uses safe work practices, and always reports hazardous conditions. Wear protective clothing &amp; equipment as required.</li><li>Develop JSA’s for new tasks and review JSA’s annually.</li><li>Perform routine and non-routine maintenance activities of mechanical and electrical systems.</li><li>Display working knowledge of electrical (single phase and 3 phase), mechanical, hydraulics, and pneumatics systems.</li><li>Install and repair electrical conduit and cable, including connections, controls, grounding, etc.</li><li>Work from electrical and mechanical schematics to troubleshoot or install new or modify existing equipment.</li><li>Perform voltmeter, ammeter, wattmeter, and other electrical measurements.</li><li>Inspect equipment and reports on defective part and unsatisfactory conditions to further preventative maintenance program.</li><li>Maintain, adjust, service and lubricate equipment keeping it in good operating conditions with respect to proper aligning, functioning and lubrication of parts.</li><li>Participate in continuous improvement and Root Cause Corrective Action (RCCA) teams.</li></ul><ul><li>Assist co-workers as directed.</li><li>Perform and complete other work as assigned by supervisor.</li><li>Provides feedback to leadership on critical equipment issues pertaining to safety or operational capabilities</li><li>Display flexible outlook toward change management, working on cross-functional teams, training for the use of new tools and methodologies, and willingness and ability to obtain operating knowledge of all production equipment.&nbsp;&nbsp;</li><li>Participate in daily housekeeping efforts.&nbsp; Ensure job site is consistently clean after every job and clean maintenance shop after every shift.</li></ul>Leadership Responsibilities:<ul><li>There are no supervisory responsibilities for direct reports for this position, but this person must have the skills to interact as a leader with all plant department employees.</li><li>Work with plant supervision to communicate the status of planned jobs, unplanned jobs waiting on parts, or unplanned jobs needing engineering or technical resources</li></ul>Requirements: (education, skills, and abilities)<ul><li>High school diploma or equivalent</li><li>1-3 years multi-craft maintenance experience</li><li>Strong commitment to safety</li><li>Ability to work well with others</li><li>Strong problem-solving capabilities</li><li>Excellent interpersonal and communications skills</li><li>Ability to work effectively in a fast-paced environment</li><li>Intermediate computer skills</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects</li><li>Ability to disassemble, diagnose, repair, and perform preventative repair measures on mechanical equipment including, but not limited to: pumps, gearboxes, reducers, couplings, seals, rotating elements, blowers, fans, hydraulic units, valves, and compressors</li><li>Demonstrate Basic Mechanical aptitude, including pipe fitting, fabricating</li><li>Knowledge of use of hand tools and power tools</li><li>Knowledge of shop machinery, including hydraulic press, mill &amp; drill press, and saw(s) (band &amp; Chop)</li><li>General knowledge of building lighting systems</li><li>General knowledge of AC/heating systems</li><li>General knowledge of building fire alarm systems</li><li>General knowledge of Lock, Tag, Clear, and Try program</li><li>Display understanding of 480V system to include arc-flash training and safe working practices per NFPA 70E</li><li>Ability to provide troubleshooting and diagnosis on process heating and cooling equipment</li><li>Ability to consistently make appropriate decisions while being flexible regarding work assignments and priorities.</li></ul><ul><li>Local travel for training purposes</li><li>Strong troubleshooting and Root Cause Corrective Action (RCCA) skillsets.</li><li>SAP experience.</li></ul>Equipment predictive/preventative reliability experiencePhysical Requirements:The physical requirements of this position are: (these requirements are typical for most of our manufacturing roles)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>The ability to stand for extended periods</li><li>The ability to manually lift, push or pull at least 50 pounds safely and with proper body mechanics, sometimes while in awkward positions.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Use of hands (repetitive motion, grabbing, feeling, sensing, pulling)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to work safely in a fast-paced, sometimes stressful work environment</li><li>The ability to safely and effectively work in an often-dusty work environment that experiences a broad range of temperatures (very hot to very cold).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to withstand the rigors of working a 12(or 8)-hour rotating shift schedule.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to bend, stoop or kneel repetitively.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>The ability to reach or work above the shoulder&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul>Incumbent must be physically able to perform essential job functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential job functions.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Technician

Title:&nbsp;Painter Division: Finance and Administration Department: Facility Operations and Planning FLSA Status:&nbsp;Non-Exempt Salary Range:&nbsp;Grade 9: $18.98/hour EEO Job Group:&nbsp;6 E7 Position Summary The University of Southern Indiana is accepting applications for&nbsp;Maintenance Mechanic - Painter. Perform wide range of maintenance work, with a concentration in painting and drywall, in a multi-building complex under direct supervision of the Lead Maintenance Mechanic. Will plan, coordinate, and carry out construction, maintenance, painting and equipment installations according to applicable codes and standards. Duties/Responsibilities&nbsp; <ul><li>Order materials needed, and make the installations and applications required for completion of drywall/painting projects while ensuring that the work conforms to codes. </li><li>Tend to the preventive and general needs for maintenance of the University's structures, equipment, furnishings, and systems and for various assignments for repair and rehabilitation projects. </li><li>Perform basic carpentry, electrical, and plumbing tasks, and tasks related to maintenance, repair, rehabilitation, and construction projects for buildings, equipment, furniture, and systems. </li><li>Repair and/or install windows, doors, partitions, coiling components, floor tiles, cove base, stair treads, wall coverings, and roofs. </li><li>Maintain inventory of painting components and supplies. Assist in maintaining building supplies, tools, equipment, and spare parts. </li><li>Construct metal stud walls, install drywall, apply mud, tape and corner and edge trim, sand and finish to be ready for paint. </li><li>Prepare surface to accept paint as necessary including sanding, scraping, chip, washing, sand blasting, etc. </li><li>Apply prime paint and finish paint to walls, ceilings, devices, fixtures, trim, poles, frames, surfaces (interior and exterior). </li><li>Remove and apply wall coverings. Install and repair wall trim pieces, floor edging, and floor coverings. </li><li>Assemble furniture, seats, and other equipment. </li><li>Set up furniture and equipment for special and academic events. </li><li>Perform snow removal and paving work as required. </li><li>Other duties as assigned. </li></ul> Required Knowledge and Skills <ul><li>High school diploma or equivalent required. </li><li>Vocational training and/or experience in trades including painting, carpentry, electrical, plumbing, and/or heating. </li><li>Valid driver’s license required. </li><li>Must be conversant with the basics of other crafts in the building trades and capable of supervising assistants on the job.</li></ul> Preferred Knowledge and Skills On-the-job experience in the painting and carpentry trades preferred. Preferred qualifications include four years’ experience in journey-level of a trade named above. Regular Work Hours/Travel Requirements Standard work hours are Monday through Friday, 7:00 a.m. to 3:00 p.m. Occasional irregular hours or overtime may be required to complete work orders. This position will rotate through as the after-hours on-call rotation to perform emergency repairs for Campus and Housing as needed. Must be available when scheduled for on-call duties. This position is considered essential. When the University closes due to inclement weather or another emergency, this position is required to report to work to perform snow and/or ice removal or other clean-up work following severe weather or other emergencies. Travel within University and occasional travel to offsite University locations using a University vehicle is required. About USI&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; The University of Southern Indiana is a public higher education institution located on a beautiful&nbsp;1,400-acre campus in Evansville, IN. We offer employees exceptional benefits! Benefits for this&nbsp;position include: <ul><li>Affordable medical, dental, vision, life and short term and long-term disability insurance plans.</li><li>Retirement plan where the University makes the total contribution equivalent to 7% of annual salary.</li><li>Full tuition fee waiver for employees/75% for spouses and dependent children.</li><li>Accrue up to 10 paid vacation days per fiscal year – accrual increases after 4, 7, and 11 years of service</li></ul> For more information about the benefits that USI offers, please visit <a href="http://www.usi.edu/hr/benefits" target="_blank">www.usi.edu/hr/benefits</a>. Application Process Click “Apply Now!” near the top right of this page to complete an application and upload application materials to the attention of the Search Committee Chair. Application materials should include: N/A Pre-Employment Screening A background check will be required for employment in this position. Authorization to Work in the United States USI typically will not sponsor an employment-related visa for this position. Interview Accommodations Persons with disabilities requiring accommodations in the application and interview process please contact the manager of Employment at <a href="mailto:mcweinzapf@usi.edu" target="_blank">mcweinzapf@usi.edu</a> or (812) 464-1840. Contacting the manager of Employment is intended for use in seeking disability-related accommodations only. For general applicant inquiries, contact Human Resources at <a href="mailto:HumanRes@usi.edu" target="_blank">HumanRes@usi.edu</a> or (812) 464-1815. EEO Statement USI is an Equal Opportunity Employer as to all protected groups, including protected veterans and individuals with disabilities

Maintenance Mechanic - Painter

Title:&nbsp;HVAC Technician - Part Time Division: Finance and Administration Department: Facility Operations and Planning FLSA Status:&nbsp;Non-Exempt Salary Range:&nbsp;Grade 10: $20.88/hour EEO Job Group:&nbsp;6 E7 Position Summary The University of Southern Indiana is accepting applications for&nbsp;HVAC Technician - Part Time. Understands the functions and means of operation of all building and plant heating, ventilating, air conditioning, lighting, communications, and alarm systems and equipment. Capable of adjusting physical and software components/systems to maintain a comfortable environment in all buildings while minimizing energy use. Makes necessary repairs and perform preventive maintenance in a multi-building complex. Duties/Responsibilities&nbsp; <ul><li>Start, stop, and adjust operations of all on line equipment to include boilers, chillers, air handling units, pumps and ancillary components. </li><li>Perform preventive maintenance checks and services. Makes repairs as found when possible. Reports other issues on a work request or to management. </li><li>Read gauges, instruments, and recorders. Understands specified limits of readings and how to react when readings are outside of limits. </li><li>Respond to emergencies. </li><li>Operate radio. </li><li>Advise on preventive maintenance measures and on energy conservation methods. </li><li>Clean and paint power plant. </li><li>Perform service work on equipment in addition to preventive maintenance. </li><li>Assist with snow removal and other weather-related events as needed. </li><li>Other duties as assigned.</li></ul> Required Knowledge and Skills <ul><li>High school diploma/GED. </li><li>Demonstrated judgment in assessing and responding to emergencies required. </li><li>Reliability for working with minimum supervision required. </li><li>Valid driver’s license required. </li><li>EPA certification (Level I and Level II or Universal) required, or ability to obtain within first 90 days of employment.</li></ul> Preferred Knowledge and Skills One year experience in the maintenance or operation of heating, air conditioning, or temperature control systems or related maintenance experience preferred. Education in a related field may substitute for experience. Regular Work Hours/Travel Requirements Part-time. Standard hours will be scheduled on first shift, Monday through Friday, 7:00 am to 3:00 pm. Travel within University and to offsite University locations using a University vehicle required. About USI&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; The University of Southern Indiana is a public higher education institution located on a beautiful&nbsp;1,400-acre campus in Evansville, IN. We offer employees exceptional benefits! Benefits for this&nbsp;position include: <ul><li>Affordable medical, dental, vision, life and short term and long-term disability insurance plans.</li><li>Retirement plan where the University makes the total contribution equivalent to 7% of annual salary.</li><li>Full tuition fee waiver for employees/75% for spouses and dependent children.</li><li>Accrue up to 10 paid vacation days per fiscal year – accrual increases after 4, 7, and 11 years of service</li></ul> For more information about the benefits that USI offers, please visit <a href="http://www.usi.edu/hr/benefits" target="_blank">www.usi.edu/hr/benefits</a>. Application Process Click “Apply Now!” near the top right of this page to complete an application and upload application materials to the attention of the Search Committee Chair. Application materials should include: N/A Pre-Employment Screening A background check will be required for employment in this position. Authorization to Work in the United States USI typically will not sponsor an employment-related visa for this position. Interview Accommodations Persons with disabilities requiring accommodations in the application and interview process please contact the manager of Employment at <a href="mailto:mcweinzapf@usi.edu" target="_blank">mcweinzapf@usi.edu</a> or (812) 464-1840. Contacting the manager of Employment is intended for use in seeking disability-related accommodations only. For general applicant inquiries, contact Human Resources at <a href="mailto:HumanRes@usi.edu" target="_blank">HumanRes@usi.edu</a> or (812) 464-1815. EEO Statement USI is an Equal Opportunity Employer as to all protected groups, including protected veterans and individuals with disabilities

HVAC Technician - Part Time

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

Dialysis Biomedical Technician

ResponsibilitiesOur state-of-the-art investment casting facility in La Porte, Indiana is nestled halfway between South Bend and Chicago, along the shores of Lake Michigan - our facility in La Porte, Indiana supplies jet engine components to some of the most trusted names in the Aerospace industry.&nbsp;Job Responsibilities and duties may include, but are not limited to, the following:<ul> <li>Utilize Coordinate Measuring Machines, Blue Light scanners, and other equipment to dimensionally inspect castings, patterns, gauges, and fixtures in order to assess their conformance to established specifications.</li> <li>Communicate the results of the inspection and its analysis to product engineer.</li> <li>Provide programming, database setup, and technical support for engineering and manufacturing requirements.</li> <li>Use discretion to schedule workflow based on priority and efficiency.</li> <li>Perform routine production inspections as required.</li> <li>Cooperate with peers by participating in an active cross-training environment.</li> <li>Adhere to applicable quality standards, company policies and procedures, customer requirements, and safety initiatives.</li></ul>Skills and Experience:<ul> <li>Ability to interpret complex blueprints, instructions, and inspection requirements.</li> <li>Utilize Analysis and 3D CAD software such as GOM, ATOS, UniGraphics, Geomagic, and Polyworks to interpret part geometry and complete Structured Light Measurement inspections and color maps.</li> <li>Computer fluency, including Microsoft Office applications and AutoCAD / UG.</li> <li>Proficiency in Microsoft office, especially Excel.</li> <li>PC-DMIS or GOM experience preferred.</li> <li>Working knowledge of CMMs and their applications, including programming.</li> <li>Practiced familiarity with Layout Inspection procedures and results.</li> <li>Advanced math skills (especially algebra, trigonometry, and geometry).</li> <li>Use of basic and advanced metrology equipment.</li> <li>Good communication skills, both verbal and written.</li> <li>Team-oriented attitude.</li> <li>Safety Awareness.</li> <li>Ability to interpret complex blueprints, instructions, and inspection requirements.</li> <li>Independent, self-motivated worker able to concentrate on difficult tasks for long periods of time or be multi-tasking.</li> <li>Perform all other job duties as assigned.</li></ul>Equipment Used:<ul> <li>Coordinate Measuring Machines.</li> <li>Blue Light scanners.</li> <li>Optical Comparators.</li> <li>Various hand tools.</li></ul>QualificationsBasic Qualifications:<ul> <li>A minimum of a High School diploma or GED equivalency is required.</li> <li>Post-secondary education and/or a technical trade certificate are an asset.</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>Preferred Qualifications:<ul> <li>Working knowledge of CMM / SLM preferred or comparable metrology experience</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Inspection Services Technician - STRUCTURED LIGHT PROGRAMMER

Take your CDL-A career further! Our drivers work hard to move, supply, and provide for America's favorite brands. Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years. Join McLane and discover the driving difference-we provide you with industry-leading pay, strong and secure client relationships, and get you home safely and more often. That's why our drivers build long-lasting careers with us. This Shuttle Driver is responsible for the delivery of full trailers to the Domicile and taking empty trailers back to the Distribution Center. Benefits you can count on: <ul><li>Pay Rate: Drivers make $75,000 to $80,000 annually.</li><li>Schedule: Sun, Mon, Wed, Thu, Fri Start time 10:00am, 2 shuttle runs per day.</li><li>Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance.</li><li>Paid holidays, earn vacation time, and sick leave accrual from day one.</li><li>401(k) Profit Sharing Plan after 90 days.</li><li>Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more!</li></ul> What you'll do as a Shuttle Driver: <ul><li>Inspect the rig for defects pre- and post-trip and submit DOT inspection report.</li><li>Ensure that product is secured inside the trailer for undamaged transport.</li><li>Maintain driver log (Manual or PeopleNet) according to DOT regulations.</li><li>May at times perform line haul and/or backhaul.</li><li>Work safely to prevent injury to people and damage to products.</li><li>Other duties as assigned. </li></ul> Qualifications you'll bring as a Shuttle Driver Teammate: <ul><li>At least 21 years of age</li><li>Valid Class A commercial driver's license (CDL-A)</li><li>At least 1 year or 50,000 verifiable miles of tractor trailer driving experience</li><li>Meet McLane's MVR and risk rating qualifications </li><li>This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.</li></ul> Fit the following? We want you here! <ul><li>Safety-focused </li><li>Reliable </li><li>Adaptable</li><li>Dedicated </li></ul> Moving America forward - together. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit <a href="https://www.mclaneco.com/legal/employment/" target="_blank">https://www.mclaneco.com/legal/employment/</a>

McLane

Driver, Shuttle

We are looking for a talented and experienced CAD technician to join our team in Indianapolis. The ideal candidate for this role will be a skilled CAD technician with experience working with Civil 3D and/or MicroStation. This is an exciting opportunity to join a growing firm recognized as a 2025 Indiana Best Places to Work. &nbsp;Lochmueller Group is a growing regional engineering consulting firm with an emphasis on infrastructure.&nbsp;&nbsp;We provide multi-disciplined services for a variety of public agencies and private entities, including transportation design; water resources design; environmental analysis &amp; permitting; construction engineering &amp; inspection; traffic engineering &amp; transportation planning; surveying; and land acquisition &amp; appraisal. Our transportation design team offers a variety of services, but most of our work involves roadway, highway, and bridge design for various local public agencies and the Indiana Department of Transportation (INDOT). For over 40 years, Lochmueller Group has helped communities reinvent their future through thoughtful, actionable planning and design.&nbsp;Our dedication to building a team that demonstrates our corporate values (CARDIA) is what sets us apart:&nbsp;CARDIA: Creativity; Accountability; Respect; Dedication; Integrity; Achievement &nbsp;Lochmueller Group provides an excellent workplace culture established by our people who share these values. We are a 100% employee-owned company, and our people are invested in the success and continued development of each other and the firm. This is a great place to build a career and grow with a company that is dedicated to quality and service.&nbsp;<h4>In this position, the candidate will: </h4><ul><li>Utilizing design software to produce detailed, and sometimes complex, drawings and plans for Roadway design projects.</li><li>Utilizing advanced CAD techniques and tools to enhance drawings.&nbsp;</li><li>Working with engineers and other designers to incorporate design changes and revisions.&nbsp;</li><li>Organizing CAD files and project documentation and ensuring proper version control and distribution of files.&nbsp;</li><li>Reading and interpreting construction plans.&nbsp;</li><li>Assisting in the preparation of quantity takeoffs and materials lists.&nbsp;</li><li>Applying a variety of specification regulations, policies and standards to assure compliance with various Federal, State and local rules and regulations.&nbsp;</li><li>Performing other duties associated with the role.</li></ul><h4>Qualifications for this role: </h4><ul><li>Associate's degree in related field or equivalent knowledge and experience. </li><li>4+ years of relevant experience working with Civil 3D and/or MicroStation. Experience working as a CAD Technician in Roadway/Highway design is strongly preferred.&nbsp; </li><li>Strong proficiency with Civil 3D and/or MicroStation. </li><li>Ability to work well independently and in a team environment. </li><li>Advanced proficiency with relevant design software. </li><li>Ability to read and interpret engineering drawings. </li><li>General working knowledge of construction materials and practices. </li><li>Strong written and verbal communication skills. </li><li>Ability to work well with others. </li><li>Proficiency with Microsoft Office products including Excel, Word, and Adobe/Bluebeam PDF Software. </li><li>Must be able to read and write effectively with strong attention to detail.&nbsp;</li></ul><h4>What we offer:</h4><ul><li>Health &amp; Wellness: medical, dental, vision, disability, and basic life insurance w/ option for additional voluntary life insurance</li><li>Work/Life Balance: vacation, holidays, sick leave, maternity/paternity leave</li><li>Wealth-Building: 401k w/ company match, student loan repayment benefit, Employee Stock Ownership Plan (ESOP), competitive compensation package</li><li>Professional Benefits: professional membership dues, career &amp; educational development</li></ul>Lochmueller Group is an Equal Opportunity/Affirmative Action employer. Lochgroup fully supports and maintains compliance with all state, federal, and local regulations. All qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, protected veteran status, genetic information, or any other category protected by federal, state, and local laws. Some of the content in this job post may have been auto-generated using advanced AI.

Lochmueller Group

Roadway Design CAD Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

11 Technician Jobs in Indiana